User Manual

Network Security Control Panel User Manual
3
Chapter 1 System Introduction
1.1 Overview
Network security control panel uses embedded microcontroller technology for zone
monitoring and system status detection. The alarm or status reports can be transmitted to
the central alarm monitoring station through programming. Multiple alarm types and report
transmission methods (telephone network, the Ethernet network, and the GPRS wireless
network) are supported. A mobile client is attached for key fobs such as pushing alarm
notifications or status reports and remote arming/disarming. The control panel is deployed
mainly in the security systems of shopping malls, stores, residences, apartments,
communities, and so on.
1.2 System Definition
1.2.1 Partition
 Definition
Partition is an independent area divided from the security control panel. Partitions
are independent control system, and can provide arming/disarming function
respectively.
 Usage
It is partitions that make it possible for users with different demands to share and
use a same intrusion alarm system. Users can disarm zones in one partition even
though zones in other partitions are in the arming status. Every system user can be
configured to have different permissions, and to operate any partition.
1.2.2 Public Partition
 Definition
Public partition is considered a special one which can be shared to other partitions.
It is usually applied to manage or control the public area related with other areas
controlled by other partitions in one building.
 Logic
The public partition is armed automatically when all partitions linked with the