User Manual

Network Security Control Panel User Manual
14
2.1.5 Stay Arming
Function: After the operation is completed, the partition will change the status of disarming
(current status) into arming immediately. The bypass supported zone of the partition will do
auto-bypass simultaneously.
Command: [User Password］+［*］+［4］+［#］
Demonstration:
E.g., the user password is
1234.
LCD Display
Press the user password: [1]
[2] [3] [4].
xxxx*4
Press [*] to enter the
working mode.
Press [4], and the control
panel enters the stay arming
status.
Press [#] to confirm the
operation.
If the operation is successful,
Operation Succeeded
If the operation is failed,
Operation Failed
2.1.6 Force Arming
Force Normal(Away) Arming
Function: After the operation is completed, all the zones in fault status except the 24-hour
arming zones will be bypassed.
Command:［User Password］+ +［#］