User Manual

Network Security Control Panel User Manual

2.1.11 Group Bypass

Group Bypass

Function: After a partition is conducted with group bypass, all the alarm devices in group-

bypass supported zone of the partition will be blocked.

Command:［User Password］ + ［*］ + ［4］ + ［1］ + ［#］

Demonstration:

E.g., the user password is

1234.

LCD Display

Press the user password:

[1] [2] [3] [4].

xxxx*41

Press [*] to enter the

working mode.

Enable group bypass by

pressing [4] [1].

Press [#] to confirm the

operation.

If the operation is successful,

Operation Succeeded

If the operation is failed,

Operation Failed

Group Bypass Recovery

Function: After recovering the group bypass of a partition, all the alarm devices in group-

bypass supported zone of the partition will be revalidated.

Command: [User Password］ + ［*］ + ［4］ + ［2］ + ［#］