User Manual

Network Security Control Panel User Manual

Demonstration:

E.g., the user password is

1234, the keyfob No. is 01,

and the partition No. is 08.

LCD Display

Press the user password: [1]

[2] [3] [4].

xxxx*9101

Press [*] to enter the

working mode.

Press [9] [1] to enter the

code matching mode.

Enter the keyfob No.: [0] [1].

Enter the partition.: [0] [8]

xxxx*910108

Press [#] to confirm the

operation.

If the operation is successful,

Operation Succeeded

If the operation is failed,

Operation Failed

2. Press any key of the keypad, and the code is matched. The keypad will exit the

code matching mode automatically.

Deleting Appointed Code-Matched Keyfob

Function: You can delete an appointed keyfob which has matched the code with the control

panel.

functions vary depending on the medel of the device.

 Option1

Command: [User Password] + [ * ] + [ 9 ] + [ 0 ] + [ keyfob No.] + [ # ]