User Manual

Network Security Control Panel User Manual
29
Press any key of the keyfob to
delete the keyfob from the
control panel.
If the operation is successful,
Operation Succeeded
If the operation is failed,
Operation Failed
Press[*]+[#]to exit the
registration mode.
Deleting All Code-Matched keyfob
Function: You can delete all keyfobs which have matched code with the control panel.
Command: [User Password] + [ * ] + [ 9 ] + [ 2 ] + [ # ]
Demonstration:
E.g., the user password is
1234.
LCD Display
Press the user password:
[1] [2] [3] [4].
xxxx*92
Press [*] to enter the
working mode.
Enter the mode for
deleting all code matched
keyfobs by pressing [9] [2].
Press [#] to confirm the
operation.
If the operation is successful,
Operation Succeeded
If the operation is failed,
Operation Failed
2.1.15 Adding/Deleting Card User
Function: You can conduct configurations for the card-swiping user.