User Manual

Network Security Control Panel User Manual
32
Demonstration:
E.g., the master code
is 1234, and the user
No. is 001.
LCD Display
Press the master
code: [1] [2] [3] [4].
xxxxProject111234567890
Press [Project] to
enter the project
mode.
Enter the mode for
deleting appointed
matched card by
pressing [1] [2] [3] [4]
[5] [6] [7] [8] [9] [0]..
Press [#] to confirm
the operation.
If the operation is successful,
Operation Succeeded
If the operation is failed,
Operation Failed
Deleting All Matched Card
Command: [Master Code] + [Project] + [1] + [5 ] + [User No.] + [ # ]