User Manual

Network Security Control Panel User Manual

Demonstration:

E.g., the master code is

1234, and the user No. is

001.

LCD Display

Press the master code:

[1] [2] [3] [4].

xxxxProject15001

Press [Project] to enter

the project mode.

Enter the mode for

deleting all matched

cards by pressing [1] [5].

Press the user No.: [0] [0]

[1].

Press [#] to confirm the

operation.

If the operation is successful,

Operation Succeeded

If the operation is failed,

Operation Failed

Exiting Card Matching (Card Deleting) Mode

Command: [*] + [ # ]

2.1.16 Adding/Deleting Wireless Detector

Function: While the wireless receiver is connected to the control panel, you can add or delete

wireless detector to the control panel.

Only the installer and operator 1 can add or delete the wireless detector.

Adding Wireless Detector

Command: [Installer Password]+[*]+[95]+[Zone No.]+[#]