User Manual

Network Security Control Panel User Manual
35
the control panel.
Operation Succeeded
If the operation is failed,
Operation Failed
Press[*]+[#]to exit the
registration mode.
2.1.17 Deleting RS-485 Expander/Receiver from Control Panel
Function: The control panel will unregister the RS-485 expander. However, if the expander is
still connected with the control panel, it will be re-registered after control panel rebooting.
Command: ［Installer Password］ + ［*］ + ［Project］ +［n］ + ［n］ +［#］