User Manual

Network Security Control Panel User Manual

Demonstration:

E.g., the installer password

is 012345.

LCD Display

Enter the installer

password: [0] [1] [2] [3] [4]

[5].

xxxxxx*0

Press [*] to enter the

working mode.

Press [0] to enter the

programming mode of

control panel.

Press [#] to confirm the

operation.

If the operation is successful,

Operation Succeeded

Programming...

If the operation is failed,

Operation Failed

Exiting Programming Mode

Command:［*］ +［#］

2.1.19 Prompt Operation

Enabling/Disabling Key Tone

Function: You can enable or disable the key tone via the keypad.

Command:［*］ + ［5］ + ［1］ + ［#］

Disabling Fault Prompt

Function: You can disable the fault alarm prompt via the keypad. It will prompt a new tone if

there is a new fault.

Command:［*］ + ［5］ + ［6］ + ［#］