User Manual

Network Security Control Panel User Manual

the alarm is dismissed.

 If the zone is disarmed, it will exit the zone testing mode automatically.

 The function of exiting the testing mode is only available for security control panel in the

version of 2.3 and above.

2.1.23 Test Report Manually Relaying

Function: You can relay test report manually. One operation generates one test report. It is

used to test the communication between the control panel and center after installing the

system or during the inspection.

Command:［User Password］ + ［*］ + ［6］ + ［1］ + ［#］

Demonstration:

E.g., the user

password is 1234.

LCD Display

Press the user

password: [1] [2] [3]

[4].

xxxx*61

Press [*] to enter the

working mode.

Relay test report

manually by pressing

[6] [1].

Press [#] to confirm

the operation.

If the operation is successful,

Operation Succeeded

If the operation is failed,

Operation Failed