User Manual

Network Security Control Panel User Manual
43
This function is only valid for bus security control panel.
Command:［Installer Password］ + ［*］ + ［8］ + ［2］ + ［#］
Demonstration:
E.g., the installer
password is 012345.
LCD Display
Press the installer
password: [0] [1] [2] [3]
[4] [5].
xxxxx*82
Press [*] to enter the
working mode.
Press [8] [2] to enter the
auto-searching mode of
the global keypad.
Press [#] to confirm the
operation.
If the operation is successful,
Operation Succeeded
If the operation is failed,
Operation Failed
2.1.27 Auto-Registration
Function: You can enter the auto-registration mode of the global keypad via the alarm
keypad. This function is only valid for bus security control panel.
Command:［Installer Password］ + ［*］ + ［8］ + ［3］ + ［#］