Quick Start Guide

HD-TVI Speed Dome·Quick Start Guide
30
3.2.2 Configuring Park Actions
Purpose:
For some certain model of the speed dome, it can be configured to start a predefined park action
(scan, preset, patrol and etc.) automatically after a period of inactivity (park time).
 Configuring Park Actions by DVR
Steps:
1. Click the PTZ in the lower-right corner of the PTZ setting interface.
Menu > Camera > PTZ
2. Click the button to show the one-touch function of the PTZ control.
Figure 3-7 PTZ Panel - One-touch
3. There are 3 one-touch park types selectable, click the corresponding button to activate the
park action.
Park (Quick Patrol): The dome starts patrol from the predefined preset 1 to preset 32 in order
after the park time. The undefined preset will be skipped.
Park (Patrol 1): The dome starts moving according to the predefined patrol 1 path after the
park time.
Park (Preset 1): The dome moves to the predefined preset 1 location after the park time.
The park time can only be set through the speed dome configuration interface. By default
the value is 5 s.
4. Click the button again to inactivate it.
 Configuring Park Actions by OSD Menu
Steps:
1. Call the preset 95 to enter the main menu and move the cursor to enter motion settings
submenu:
MAIN MENU > DOME SETTINGS > MOTION SETTINGS