Quick Start Guide

HD-TVI Speed Dome·Quick Start Guide
2
1.2 DIP Switch Settings
1.2.1 Mini Speed Dome Settings
The DIP switch is for setting the speed dome address, baudrate, protocol, video output mode, and
terminal resistor, with value OFF=0. The mini speed dome’s DIP switch is shown in Figure1-2.
DIP Switch
Figure 1-2 DIP Switch of Mini Analog Speed Dome
1 75 6432 8 9 10
ON DIP
1 2
ON
Figure 1-3 Enlarged View of DIP Switch
 For some certain models, the two individual DIP switches are at the left side of the Figure1-3 for
turning on/off the terminal resistor.
 The default address is 0, the default baudrate is 2400, and the default terminal resistor is OFF.
Table 1-2 Switch Functions
Switch No.
Function
1 to 2 (SW2)
Set the terminal resistor
1 to 5 (SW1)
Set the address for the speed dome
6 to 7 (SW1)
Set the baudrate for the speed dome
8 (SW1)
Set the protocol for the speed dome
9 to 10 (SW1)
Set the video output mode for the speed dome
 Address Settings