User Manual

User Manual of HD-TVI Speed Dome
32
PATTERNS
PATTERN NO. 1
RECORD PATTERN
PREVIEW
CLEAR
REMAINING 100
BACK EXIT
Figure 3-15 Pattern Configuration Menu
2. Choose the pattern number.
Steps:
(1) Move the cursor to PATTERN NO. and click IRIS+ to enter edit mode.
(2) Click the up/down direction buttons to select the number of the pattern which is to be
configured.
(3) Click IRIS+ again to confirm the settings.
Up to 5 patterns can be configured.
3. Edit the pattern.
Steps:
(1) Move the cursor to RECORD PATTERN and click IRIS+ to enter edit mode.
REMAIN MEMORY 100
IRIS + OK
IRIS - CANCEL
Figure 3-16 Edit the Pattern
(2) Click the PTZ control buttons and direction buttons to operate the speed dome to draw a
movement path, including pan scan, tilt scan, zoom in, zoom out, etc. The speed dome can
automatically memorize the path you operated as a pattern.
(3) Click IRIS+ again to save the pattern and exit edit mode.
 REMAIN MEMORY indicates the remaining memory of the speed dome for configuring the
patterns. When it reaches 0, no more patterns can be configured. You can also see the