User Manual

12
Installation
Before you start:
 Make sure that the device in the package is in good condition
and all the assembly parts are included.
 Make sure that all the related equipment is power-off during
the installation.
 Check the specification of the products for the installation
environment.
 Check whether the power supply is matched with your
power output to avoid damage.
 Make sure the wall is strong enough to withstand three
times the weight of the camera and the mounting bracket.
 If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use self-tapping
screw to secure the camera.
 If the product does not function properly, contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
2.1 Type I and Type II Camera Installation
2.1.1 Ceiling Mounting
Steps:
1. Attach the drill template to the celling.
2. Drill screw holes and the cable hole (optional) on the ceiling
according to the supplied drill template.