User Manual
Table Of Contents
15
Type I Camera:
0° to
355°
0° to 355°
0° to 75°
0° to 355°
0° to 340°
0° to 75°
Type II Camera:
Figure 2. 4 3-Axis Adjustment
9. Fit the black liner on the camera and tighten the screws on
the bubble of the dome camera to finish the installation.
2.1.2 Wall Mounting
Note:
You need to purchase a wall mounting bracket separately, if you
adopt the wall mounting.
Steps:
1. Drill 4 screw holes in the wall according to the holes of the
bracket.
2. Attach the bracket to the wall by aligning the 4 screw holes of
the bracket with expansion screws on the wall.
3. Secure the bracket with 4 hex nuts and washers.