User Manual

17
6. Route the cables through the bracket.
7. Repeat steps 6 to 9 of the 2.1.1 Ceiling Mounting to complete
the installation.
2.1.3 In-Ceiling Mounting
Note:
You need to purchase an in-ceiling mounting bracket separately if
you adopt the in-ceiling mounting.
Steps:
1. Attach the drill template on the ceiling.
2. Drill the screw holes and cable holes (optional) in the ceiling
according to the supplied drill template.
Note:
Cable hole is required when adopting ceiling outlet to route the
cable.
3. Screw the bolts through the mounting bracket by aligning
with the 2 bolt holes. Fit the toggles onto the bolts.
4. Push the two toggles through the two screw holes in the
ceiling. Rotate the bolt till the toggle holds the ceiling tightly.
Figure 2. 7 Install the In-Ceiling Mounting Bracket
5. Route the cables through the cable hole.