How to Guide

Title:
How to Enable ONVIF Protocol on IP Camera
Version:
v1.0
Date:
07/03/2019
Product:
IP Camera
Page:
3 of 4
© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: [phone] • Fax: [phone]
E-Mail: [e-mail] • www.hikvision.com
Note:
1. Only the IP camera firmware version is V5.5.0 or above support it.
2. ONVIF protocol of IP camera firmware version below V5.5.0 is default enabled, ONVIF
username and password are same as camera’s username and password