User Manual

User Manual of Network Camera

object which can trigger the alarm. When the sensitivity is high, a very small

object exiting from the region can trigger the alarm.

7. Repeat the above steps to configure other regions. Up to 4 regions can be set. You

can click the Clear button to clear all pre-defined regions.

8. Click the Edit button to set the arming schedule.

9. Select the linkage methods for region exiting detection, including Notify

Surveillance Center, Send Email, Upload to FTP, Trigger Channel and Trigger

Alarm Output.

10. Click Save to save the settings.

Figure 6-65 Configuring Region Exiting Detection

6.6.15 Configuring Loitering Detection

Purpose:

Loitering detection function detects people, vehicle or other objects which loiter in a

pre-defined virtual region for some certain time, and a series of actions can be taken

when the alarm is triggered.

Note: Loitering detection function varies according to different camera models.

Steps:

1. Enter the Loitering Detection settings interface: