User Manual

User Manual of Network Camera

information, please refer to Section 6.3.1 Configuring TCP/IP Settings.

Figure 2-3 SADP Interface

2.2 Setting the Network Camera over the WAN

Purpose:

This section explains how to connect the network camera to the WAN with a

static IP or a dynamic IP.

2.2.1 Static IP Connection

Before you start:

Please apply a static IP from an ISP (Internet Service Provider). With the static

IP address, you can connect the network camera via a router or connect it to the

WAN directly.

 Connecting the network camera via a router

Steps:

1. Connect the network camera to the router.

2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section

2.1.2 Detecting and Changing the IP Address for detailed IP address