User Manual

User Manual of Network Camera
156
4. Click Export and set the saving path to save the configuration file in local
storage.
Figure 12-15 Import/Export Configuration File
12.7.4 Upgrading the System
Steps:
1. Enter the Maintenance interface: Configuration > Basic Configuration> System >
Maintenance , or Configuration > Advanced Configuration> System > Maintenance
2. Select firmware or firmware directory to locate the upgrade file.
Firmware: Locate the exact path of the upgrade file.
Firmware Directory: Only the directory the upgrade file belongs to is required.
3. Click Browse to select the local upgrade file and then click Upgrade to start
remote upgrade.
Figure 12-16 Remote Upgrade
Note: The upgrading process will take 1~10 minutes. Please don't disconnect
power of the camera during the process, and the camera reboots automatically
after upgrade.
12.8 RS-232 Settings
The RS-232 port can be used in two ways:
 Parameters Configuration: Connect a computer to the camera through the serial