User Manual

User Manual of Network Camera

6.6.6 Configuring Other Alarm

Note: Some certain cameras support Wireless Alarm, PIR (passive infrared sensor)

Alarm or Emergency Alarm.

 Wireless Alarm

Purpose:

When wireless alarm signal is sent to the camera from the detector, such as the

wireless door contact, the wireless alarm is triggered and a series of response actions

can be taken.

Steps:

1. Enter the Wireless Alarm Settings interface:

Configuration > Advanced Configuration> Basic Event> Other Alarm

2. Select the wireless alarm number.

Up to 8 channels of external wireless alarm input are supported.

3. Check the checkbox of Enable Wireless Alarm to activate the wireless alarm.

4. Input the alarm name in the text field as desired.

5. Check the checkbox to select the linkage methods taken for the wireless alarm.

6. Click Save to save the settings.

7. Locate the external wireless device beside the camera, and go to Configuration >

Advanced Configuration> System> Remote Control to arm the camera and

study the wireless alarm.

Figure 6-55 Configuring Wireless Alarm Settings