User Manual

User Manual of Network Camera

 PIR Alarm

Purpose:

A PIR (Passive Infrared) alarm is triggered when an intruder moves within the

detector's field of view. The heat energy dissipated by a person, or any other warm

blooded creature such as dogs, cats, etc., can be detected.

Steps:

1. Enter the PIR Alarm Settings interface:

Configuration > Advanced Configuration> Basic Event> Other Alarm

2. Check the checkbox of Enable PIR Alarm to activate the PIR alarm function.

3. Input the alarm name in the text field as desired.

4. Check the checkbox to select the linkage methods taken for the PIR alarm.

5. Click the Edit button to set the arming schedule.

6. Click Save to save the settings.

7. Go to Configuration > Advanced Configuration> System> Remote Control to

arm the camera.

Figure 6-56 Configuring PIR Alarm Settings