User Manual

User Manual of Network Camera

6.6.1 Configuring Motion Detection

Purpose:

Motion detection detects the moving objects in the configured surveillance area, and a

series of actions can be taken when the alarm is triggered..

In order to detect the moving objects accurately and reduce the false alarm rate,

normal configuration and expert configuration are selectable for different motion

detection environment.

 Normal Configuration

Normal configuration adopts the same one set of motion detection parameters in the

daytime and at night.

Tasks:

1. Set the Motion Detection Area.

Steps:

(1)Enter the motion detection settings interface

Configuration > Advanced Configuration> Basic Event > Motion

Detection

(2)Check the checkbox of Enable Motion Detection.

(3)Check the checkbox of Enable Dynamic Analysis for Motion if you want to

mark the detected objects with green rectangles.

Note: Select Disable for rules if you don’t want the detected objected

displayed with the rectangles. Select disable from Configuration>Local

Configuration>Live View Parameters>rules.