User Manual

User Manual of Network Camera

Figure 6-64 Configuring Region Entrance Detection

6.6.14 Configuring Region Exiting Detection

Purpose:

Region exiting detection function detects people, vehicle or other objects which exit

from a pre-defined virtual region, and some certain actions can be taken when the

alarm is triggered.

Note: Region exiting detection function varies according to different camera models.

Steps:

1. Enter the Region Exiting Detection settings interface:

Configuration> Advanced Configuration> Smart Event> Region Exiting

Detection

2. Check the checkbox of Enable Region Exiting Detection to enable the function.

3. Select the region from the drop-down list for detection settings.

4. Click the Draw Area button to start the region drawing.

5. Click on the live video to specify the four vertexes of the detection region, and

right click to complete drawing.

6. Click-and-drag the slider to set the detection sensitivity.

Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the