Quick Start Guide

Network Turret Camera·Quick Start Guide
31
Connect the corresponding power/network cable. Refer to the
section 2.3 for the waterproof accessory installation if the
camera is installed in the outdoor.
Install the camera along with the enclosure to the mounting
base.
Figure 2-27 Install the Camera
Adjust the surveillance angle of the camera. Secure the fixing
screw after adjustment.
Pan:
0° to 360°
Tilt:
0° to 75°
Rotate:
0° to 360°
Figure 2-28 Adjust Surveillance Angle
Attach the trim ring to the camera and rotate the trim ring
clockwise to get it secured.