Quick Start Guide

Network Turret Camera·Quick Start Guide
37
Connect the corresponding power/network cable. Refer to the
section 2.3 for the waterproof accessory installation if the
camera is installed in the outdoor.
Install the camera and the enclosure to the mounting base,
adjust the surveillance angle, and fix the trim ring.
Refer to corresponding steps in ceiling mounting of each
camera type.
Figure 2-38 Wall Mounting
2.2.2 Pendant Mounting
The pendant mounting bracket is not included in the package. You
need to prepare one in advance, if you adopt this mounting type.
Steps:
Mark the screw holes on desired mounting place.
Drill three screw holes for expansion bolts.
Route the cables and fix the pendant mounting bracket to
ceiling.