How to Guide

Title:
How to Preview IP Camera via Multicast Protocol
Version:
v1.1
Date:
20/03/2019
Product:
Cameras
Page:
1 of 4
© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Tel: +86-571-8807-5998 • Fax: +1 909-595-0788
E-Mail: support@hikvision.com www.hikvision.com
Preparation
1. IP camera and PC must be on the same network segment
2. Switchers support multicast protocol while most routers doesn’t support it by default, so extra configuration
is necessary.
How to Preview IP Camera via Multicast Protocol
1. Set multicast address
Go to [Configuration]-[Network]-[Basic Setting]-[TCP/IP] to set multicast address, range of multicast
address is from 224.0.0.0 to 239.255.255.255.
2. Set live view protocol

Summary of content (4 pages)