How to Guide

Title:
How to Get IPC MJPEG Stream via HTTP Commands
Version:
v1.0
Date:
16/08/2018
Product:
Cameras
Page:
1 of 3
© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Tel: +86-571-8807-5998 • Fax: +1 909-595-0788
E-Mail: support@hikvision.com www.hikvision.com
Preparation
1. The firmware of camera requires V4.1 or above
How to Get IPC MJPEG Stream via HTTP Commands
1. Configure video stream
a) HTTP commands get stream only be available under Sub stream.
b) Go to [Configuration]-[Video/Audio]-[Video], set the Stream Type as Sub-stream and Video
Encoding as MJPEG. Resolution can be adjusted according to the current condition.
2. Get stream on Firefox or Chrome
HTTP commands is only available on Firefox or Chrome browser.
a) URL:
HTTP without Authentication
http://<IP address of IPC>:<HTTP port>/ISAPI/Streaming/channels/102/httpPreview
HTTP with Authentication

Summary of content (3 pages)