User Manual

Network Camera User Manual
168
trigger one notification.
ii. Set regional people queuing-up settings.
Check OSD to display the region name and its real-time queuing-up
people number.
Alarm Trigger Condition: When the people number in the region is
greater than, less than, equal to or not equal to the set threshold, an alarm
is triggered.
Alarm threshold: An alarm is triggered when the alarm threshold
condition is met.
iii. Set waiting time detection settings.
Alarm Trigger Condition: When the people number in the region is
greater than, less than, equal to or not equal to the set threshold, an alarm
is triggered.
Alarm threshold: An alarm is triggered when the alarm threshold
condition is met.
c) Repeat above steps to set up other regions if needed. Up to 3 regions are
supported.
2. Arming Schedule.
Set the arming schedule for the function. In the armed periods, the function is
active. Refer to Task 2 in Section 10.1.1.
3. Linkage Method. Set linkage method.
For triggered alarm information, you can set the linkage action as a response to
forward the information or trigger other actions. Refer to Task 3 in Section 10.1.1.
4. Advanced Configuration.
(Optional) Check the queue management version and set the filtering parameters.
Note: The function changes the detection range and the sensitivity of the queue
management. Remain filter settings unchanged in general situations. You are
recommended to ask the professional technical supports for help to set the filter
parameters if necessary.