User Manual

Table Of Contents
Network Camera User Manual
88
10.2.1 Set Face Capture
The face that appears in the configured area can be captured.
Before You Start
To enable the function, go to VCA Resource and select Face Capture.
Steps
1. Go to Configuration Face Capture.
2. For shield region settings, refer to Set Shield Region.
3. Select Rule and check Rule.
4. Click to draw the detection area. It is recommended that the drawn area occupies 1/2 to
2/3 of the live view image.
5. Click and draw a rectangle based on the pupil distance of the face on the live view.
Figure 10-1 Set face capture
The device will detect whether there is a human face in the area by the set minimum pupil
distance.
6. For the arming schedule settings, refer to Set Arming Schedule. For the linkage method settings,
refer to Linkage Method Settings.
7. Click Save.
8. For overlay and capture settings, refer to Overlay and Capture. For advanced parameters
settings, refer to Face Capture Algorithms Parameters.
Result
You can view and download captured face images in Picture. Refer to View and Download Picture
for details.
10.2.2 Overlay and Capture
Choose to configure capture parameters and the information you want to display on stream and
picture.
Display VCA info. on Stream