User Manual

Table Of Contents

Network Camera User Manual

Chapter 3 Access to the Network

Camera

Accessing by Web Browsers

Note:

For certain camera models, HTTPS is enabled by default and the camera creates an

unsigned certificate automatically. When you access to the camera the first time, the

web browser prompts a notification about the certificate issue.

To cancel the notification, install a signed-certificate to the camera. For detailed

operation, see 7.2.6 HTTPS Settings.

Steps:

1. Open the web browser.

2. In the browser address bar, input the IP address of the network camera, and press

the Enter key to enter the login interface.

Note:

The default IP address is 192.168.1.64. You are recommended to change the IP

address to the same subnet with your computer.

3. Input the user name and password and click Login.

The admin user should configure the device accounts and user/operator permissions

properly. Delete the unnecessary accounts and user/operator permissions.

Note:

The IP address gets locked if the admin user performs 7 failed password attempts

(5 attempts for the user/operator).