Quick Start Guide

Network Dome Camera·Quick Start Guide
13
13
2.1 Memory Card Installation
This series of cameras support memory card installation. Installation
steps are as follows.
1. Unscrew the three screws on the camera housing and remove the
bubble.
2. Insert the memory card into the memory card slot until it clicks
into place.
3. Replace and fix the bubble to finish memory card installation.
Figure 2-1 Install the Memory Card
2.2 Ceiling Mounting
Steps:
1. Paste the drill template onto the installing surface of the ceiling.
Drill the screw holes and the cable hole in the ceiling according to
the supplied drill template.