Quick Start Guide
Table Of Contents
Network Dome CameraยทQuick Start Guide
14
14
Drilling Template
Screw hole 1:for Mounting Base
Hole A:for cables routed through the ceiling
FRONT
A
1
1
1
Cable Outlet
Drill Template Figure 2-2
2. Fasten one third part of the screw into the drilled screw holes.
Hammer the Screws Figure 2-3
3. Align the three screws holes on the camera to the inserted screw,
and rotate the camera clockwise to hook the camera on the
screws. Route the network cable and power supply cable from the
cable hole, and connect the corresponding cables.