Quick Start Guide
Table Of Contents
Network Dome CameraยทQuick Start Guide
17
17
2. Align the three screws holes on the camera pedestal to the screws
holes on the bowl-shaped cap.
3. Route the network cable and power supply cable through the
bowl-shaped cap and fix the camera on the cap.
DC12VIN
Bowl-Shaped Cap
Figure 2-8 Fix the Camera
4. Align the bowl-shaped cap to the wall bracket top and rotate the
bowl-shaped cap clockwise to fix the cap on the wall bracket.
DC
12
V
IN
Bowl-Shaped Cap
Wall Bracket Top
Install the Bowl-Shaped Cap Figure 2-9