Operation Manual

User Manual of Network Camera

Chapter 7 Storage Settings

Before you start:

To configure record settings, please make sure that you have the network storage

device within the network or the SD card inserted in your camera.

7.1 Configuring NAS Settings

Before you start:

The network disk should be available within the network and properly configured to

store the recorded files, log files, etc.

Steps:

1. Add the network disk

(1) Enter the NAS (Network-Attached Storage) Settings interface:

Configuration > Advanced Configuration > Storage > NAS

Figure 7-1 Add Network Disk

(2) Enter the IP address of the network disk, and the default file path is

/dvr/share.

Note: The network disk file path name share is user-defined while creating the

DVR network storage. Please refer to the User Manual of NAS for creating the file

path.

(3) Click to add the network disk.

Note: After having saved successfully, you need to reboot the camera to activate

the settings.

2. Initialize the added network disk.

(1) Enter the HDD Settings interface (Advanced Configuration > Storage >

Storage Management), in which you can view the capacity, free space, status,

type and property of the disk.

Figure 7-2 Initialize Disk