Network Box Camera Installation Manual V3.0.0 Hangzhou Hikvision Digital Technology Co., Ltd. http://www.hikvision.
Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to DS‐2CD883F‐E(W), DS‐2CD863PF(NF)‐E(W), DS‐2CD853F‐E(W), DS‐2CD854F‐E(W), DS‐2CD893PF(NF)‐E(W), DS‐2CD893PFWD(NFWD)‐E(W) and DS‐2CD833F‐E(W) Network Camera. This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual.
1 Installation Manual of Network Box Camera Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. The precaution measure is divided into ‘Warnings’ and ‘Cautions’: Warnings: Serious injury or death may be caused if any of these warnings are neglected. Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
2 Installation Manual of Network Box Camera Notice: 1. Make sure the power supply voltage is correct before using the camera. 2. Do not drop the camera or subject it to physical shock. 3. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put on the lens cap to protect the sensor from dirt. 4. Do not aim the camera at the sun or extra bright places.
3 Installation Manual of Network Box Camera Table of Contents Chapter 1 Introduction.................................................................................................. 1 1.1 Network camera Functions and Features.......................................................... 1 1.2 Applications....................................................................................................... 1 Chapter 2 Installation................................................................................
4 Installation Manual of Network Box Camera Dimensions...................................................................................................... 16 DS‐2CD893PF(NF)‐E(W)...........................................................................................17 Specification ......................................................................................................17 Dimensions........................................................................................................
1 Installation Manual of Network Box Camera Chapter 1 Introduction Network camera is a kind of embedded digital surveillance product that combines the features of both traditional analog camera and network DVS (Digital Video Server). Due to the embedded Linux operation system and the latest Davinci hardware platform of TI, the system operates with high scheduling efficiency. Furthermore, the firmware is burned in the flash, which makes the product small, reliable and highly stable. 1.
2 Installation Manual of Network Box Camera Chapter 2 Installation NOTE: 1. Please check if all the items on the package list have been included with your camera. 2. Read the following contents carefully before the installation. 3. Make sure that all the related equipment is power‐off during the installation. 4. Check the power supply to prevent any damage caused by mismatching problems. 5. If the product does not operate properly, please contact your dealer or the nearest service center.
3 Installation Manual of Network Box Camera Serial NO. Description 1 Lens mount 2 Back Focus Ring 3 SD card slot 4 Auto iris interface Back Focus Adjustment: When it still fails to realize precise focusing after having confirmed the correct lens interface, the back focus adjustment may be required.
4 Installation Manual of Network Box Camera 2.1.2 Rear Panel Description Serial NO.
5 Installation Manual of Network Box Camera 2.1.3 Camera Connection Note: The alarm input is a NO/NC relay. If the input is not a NO/NC relay, follow the connection diagram below: To connect to an AC/DC load, use the following diagram: Hangzhou Hikvision Digital Technology Co., Ltd.
6 Installation Manual of Network Box Camera The alarm output is an on/off output that requires external power supply on connection. The external power supply shall be 12V DC/30mA, or use AC with external relays. Equipment damage or electric shock may cause if without relays. Hangzhou Hikvision Digital Technology Co., Ltd.
7 Installation Manual of Network Box Camera 2.2 Hardware Installation Box camera can be fixed in both wall and ceiling, customers can choose different ways to install the camera according to their specific needs. The following section introduces the ceiling mounting, and the wall mounting follows the same way: Step 1: Fix the camera mounting bracket to the ceiling. Fig 2.2.
8 Installation Manual of Network Box Camera Fig 2.2.2 Fix the Camera Step 3: Mount the camera lens: connect the VIDEO OUT interface of the camera to the debugging monitor, and adjust lens focus until you have obtained the clearest video images on the monitor, and then lock the lens. If required, loosen the knob on the mounting bracket and adjust the camera lens to the desired monitoring scene, and finally tighten the knob on bracket. Fig 2.2.
9 Installation Manual of Network Box Camera Appendix Product Specification DS‐2CD883F‐E(W) Specification DS‐2CD883F‐E(W) Model Parameter 5 Megapixel 1/2.5" CMOS ICR Day&Night Network Box Camera Camera Image Sensor 1/2.5" Progressive Scan CMOS Min. Illumination Color: 0.6Lux @(F1.2, AGC ON) B / W: 0.08Lux @(F1.2, AGC ON) Electronic Shutter 1/25s ~1/20,000s Lens Mount C/CS mount Auto Iris DC Drive Day&Night IR cut filter with auto switch Compression Standard Video Compression Bit rate H.
10 Installation Manual of Network Box Camera Initial Set button, Anti‐flicker, Dual Stream, Heartbeat, Password Protection, Watermark Basic Interface Audio Input Audio Output Communication Interface 1 channel microphone input, 3.5mm mini‐jack 1 channel 3.
11 Installation Manual of Network Box Camera DS‐2CD863PF(NF)‐E(W) Specification Model Parameter DS‐2CD863PF(NF)‐E(W) 1.3 Megapixel 1/3" CCD ICR Day&Night Network Box Camera Camera Image Sensor 1/3" SONY Progressive Scan CCD Signal System PAL/NTSC Min. Illumination Color: 0.1Lux @ (F1.2, AGC ON) B / W: 0.01Lux @ (F1.
12 Installation Manual of Network Box Camera Communication Interface 1 RJ45 10M / 100M self‐adaptive Ethernet interface and 1 RS‐485 interface Alarm Input 1 channel Alarm Output 1 channel Video Output 1Vp‐p Composite Output (75Ω/BNC) General Operating Condition ‐10℃~60℃, Humidity 90% or less(non‐condensing) Power Supply DC12V±10% / PoE (AC24V optional) Power Consumption 7.5W MAX(12.5W MAX with ICR Working) Dimensions(mm) Weight 68 × 57 × 144.8 (2.7” × 2.2” × 5.7”) 500g (1.
13 Installation Manual of Network Box Camera DS‐2CD853F‐E(W) Specification DS‐2CD853F‐E(W) Model Parameter 2 Megapixel 1/3" CMOS ICR Day&Night Network Box Camera Camera Image Sensor 1/3" Progressive Scan CMOS Min. Illumination Color: 0.5Lux @(F1.2, AGC ON), 0.1Lux @(F1.2, AGC ON, Sense‐up×5) B / W: 0.05Lux @(F1.2, AGC ON) , 0.01Lux @(F1.
14 Installation Manual of Network Box Camera Audio Output Communication Interface 1 channel 3.5mm audio interface (Line level, 600Ω) 1 RJ45 10M / 100M self‐adaptive Ethernet interface and 1 RS‐485 interface Alarm Input 1 channel Alarm Output 1 channel Video Output 1Vp‐p Composite Output (75Ω/BNC) General Operating Condition ‐10℃~60℃, Humidity 90% or less(non‐condensing) Power Supply DC12V±10% / PoE (AC24V optional) Power Consumption 4.5W MAX(9.
15 Installation Manual of Network Box Camera DS‐2CD854F‐E(W) Specification DS‐2CD854F‐E(W) Model Parameter 3 Megapixel 1/3" CMOS ICR Day&Night Network Box Camera Camera Image Sensor 1/3" Progressive Scan CMOS Min. Illumination Color: 0.6 Lux @(F1.2, AGC ON) B / W: 0.08 Lux @(F1.2, AGC ON) Electronic Shutter 1/25s ~1/100,000s Lens Mount C/CS mount Auto Iris DC Drive Day&Night IR cut filter with auto switch Compression Standard Video Compression Bit rate H.
16 Installation Manual of Network Box Camera Interface interface Alarm Input 1 channel Alarm Output 1 channel Video Output 1Vp‐p Composite Output (75Ω/BNC) General Operating Condition ‐10℃~60℃, Humidity 90% or less(non‐condensing) Power Supply DC12V±10% / PoE (AC24V optional) Power Consumption 5.5W MAX(10.5W MAX with ICR Working) Dimensions(mm) Weight 68 × 57 × 144.8 (2.7” × 2.2” × 5.7”) 500g (1.1lbs) *”W” series supports Wi‐Fi (802.
17 Installation Manual of Network Box Camera DS‐2CD893PF(NF)‐E(W) Specification Model Parameter DS‐2CD893PF(NF)‐E(W) 4CIF 1/3" CCD Low Illumination ICR Day&Night Network Box Camera Camera Image Sensor 1/3" SONY CCD Signal System PAL/NTSC Min. Illumination Color: 0.02Lux @(F1.2, AGC ON) B / W: 0.002Lux @(F1.2, AGC ON) Electronic Shutter 1/25(1/30)s ~1/100,000s Lens Mount Auto Iris C/CS mount DC Drive Day&Night IR cut filter with auto switch Compression Standard Video Compression Bit rate H.
18 Installation Manual of Network Box Camera Communication Interface 1 RJ45 10M / 100M self‐adaptive Ethernet interface and 1 RS‐485 interface Alarm Input 1 channel Alarm Output 1channel Video Output 1Vp‐p Composite Output (75Ω/BNC) General Operating Condition ‐10℃~60℃, Humidity 90% or less(non‐condensing) Power Supply DC12V±10% / PoE (AC24V optional) Power Consumption 5.5W MAX(10.5W MAX with ICR Working) Dimensions(mm) Weight 68 × 57 × 144.8 (2.7” × 2.2” × 5.7”) 500g (1.
19 Installation Manual of Network Box Camera DS‐2CD893PFWD(NFWD)‐E(W) Specification Model Parameter DS‐2CD893PFWD(NFWD)‐E(W) 4CIF 1/3" CCD WDR ICR Day&Night Network Box Camera Camera Image Sensor 1/3" SONY vertical double density interline CCD Signal System PAL/NTSC Min. Illumination Color: 0.1Lux @ (F1.2, AGC ON) B / W: 0.01Lux @ (F1.
20 Installation Manual of Network Box Camera Audio Input Audio Output Communication Interface 1 channel microphone input, 3.5mm mini‐jack 1 channel 3.5mm audio interface (Line level, 600Ω) 1 RJ45 10M / 100M self‐adaptive Ethernet interface and 1 RS‐485 interface Alarm Input 1 channel Alarm Output 1channel Video Output 1Vp‐p Composite Output (75Ω/BNC) General Operating Condition ‐10℃~60℃, Humidity 90% or less(non‐condensing) Power Supply DC12V±10% / PoE (AC24V optional) Power Consumption 5.
21 Installation Manual of Network Box Camera DS‐2CD833F‐E(W) Specification Model Parameter DS‐2CD833F‐E(W) VGA 1/4" CMOS ICR Day&Night Network Box Camera Camera Image Sensor 1/4" Progressive Scan CMOS Min. Illumination Color: 0.2Lux @ (F1.2, AGC ON) B / W: 0.02Lux @ (F1.2, AGC ON) Electronic Shutter 1/25s ~1/100,000s Lens Mount C/CS mount Auto Iris DC Drive Day&Night IR cut filter with auto switch Compression Standard Video Compression Bit rate H.
22 Installation Manual of Network Box Camera Interface interface Alarm Input 1 channel Alarm Output 1channel Video Output 1Vp‐p Composite Output (75Ω/BNC) General Operating Condition ‐10℃~60℃, Humidity 90% or less(non‐condensing) Power Supply DC12V±10% / PoE (AC24V optional) Power Consumption 4.5W MAX(9.5W MAX with ICR Working) Dimensions(mm) Weight 68 × 57 × 144.8 (2.7” × 2.2” × 5.7”) 500g (1.1lbs) *”W” series supports Wi‐Fi (802.11g); Dimensions Hangzhou Hikvision Digital Technology Co.
23 Installation Manual of Network Box Camera First Choice for Security Professionals Hangzhou Hikvision Digital Technology Co., Ltd.