User Manual

Safety Instruction
These instructions are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
The precaution measure is divided into “Warnings” and
“Cautions”
Warnings: Serious injury or death may occur if any of
the warnings are neglected.
Cautions: Injury or equipment damage may occur if any
of the cautions are neglected.
Warnings
 In the use of the product, you must be in strict
compliance with the electrical safety regulations of
the nation and region.
 Refer to technical specifications for detailed
information.
 Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 12 V
DC according to the IEC60950-1 standard. Refer to
technical specifications for detailed information.
 Do not connect several devices to one power adapter
as adapter overload may cause over-heating or a fire
hazard.
 Make sure that the plug is firmly connected to the
power socket.
 When the product is mounted on wall or ceiling, the
device shall be firmly fixed.
 If smoke, odor or noise rise from the device, turn off
the power at once and unplug the power cable, and
then contact the service center.
 If the product does not work properly, contact your
dealer or the nearest service center. Never attempt to
disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by
unauthorized repair or maintenance.)
Cautions
 Make sure the power supply voltage is correct before
using the camera.
 Do not drop the camera or subject it to physical
shock.
 Do not touch senor modules with fingers. If cleaning
is necessary, use clean cloth with a bit of ethanol and
wipe it gently.
 Do not aim the camera at the sun or extra bright
places. Blooming or smearing may occur otherwise
(which is not a malfunction), and affect the
endurance of sensor at the same time.
Warnings Follow
these safeguards to
prevent serious injury
or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.