User Manual

CONTRAST
This feature enhances the difference in color and light
between parts of an image. You can set the CONTRAST
value from 1 to 10.
SHARPNESS
Sharpness determines the amount of detail an imaging
system can reproduce. You can set the SHARPNESS
value from 1 to 10.
COLOR GAIN
Adjust this feature to change the saturation of the color.
The value ranges from 1 to 10.
3 DNR (Digital Noise Reduction)
The 3 DNR function can decrease the noise effect,
especially when capturing moving images in poor light
conditions, and delivering more accurate and sharper
image. You can set the 3 DNR value from 1 to 10.
MIRROR
DEFAULT, H, V, and HV are selectable for mirror.
DEFAULT: The mirror function is disabled.
H: The image flips 180° horizontally.
V: The image flips 180° vertically.
HV: The image flips 180° both horizontally and
vertically.
3.4.5 FUNC (Functions)
In the FUNC sub-menu, you can set the PIR level,
privacy mask, the motion detection, camera ID, and
DPC of the camera.
PIR LEVEL
PIR LEVEL controls the sensitivity of the visible alarm
with the value ranging from 1 to 5, and the greater the
value is, the more sensitive the PIR module is.
PRIVACY
The privacy mask allows you to cover certain areas
which you don’t want to be viewed or recorded. Up to 4
privacy areas are configurable.
PRIVACY
MODE
AREA 0
AREA 1
AREA 2
AREA 3
COLOR
TRANSPARENCY
RETURN
ON




RED
OFF
Figure 3-10 PRIVACY
Select a PRIVACY area. Set the MODE as ON. Click
up/down/left/down button to define the position, and
the size of the area.
MOTION
In the user-defined motion detection surveillance area,
the moving object can be detected and the alarm will
be triggered. Up to 4 motion detection areas can be
configured.