User Manual

MOTION
MODE
AREA 0
AREA 1
AREA 2
AREA 3
SENSITIVITY
COLOR
TRANSPARENCY
RETURN
OFF




50
RED
OFF
Figure 3-11 MOTION
Select a MOTION area. Set the MODE as ON. Click the
up/down/left/right button to define the position, and
the size of the area. Set the SENSITIVITY from 0 to 100.
CAMERA ID
Edit the camera ID on this section.
CAM ID SETTING
MODE
CAM ID
X POSITION
Y POSITION
RETURN
ON

75
36
16
Figure 3-12 CAM ID SETTING
Set the MODE as ON. Click up/down/left/right button to
choose the camera ID, and the position.
DPC (Defective Pixel Correction)
Defective pixels are pixels in a CMOS image sensor, in
which fail to sense light levels correctly.
This series of camera supports defective pixel correction.
You can set the DPC as ON or OFF.
3.4.6 RESET
Reset all the settings to the factory default.
3.4.7 SAVE & EXIT
Move the cursor to SAVE & EXIT and click Iris+ to save
the setting, and exit the menu.
UD09304B