User Manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Network Connection
- Chapter 3 Accessing to the Network Speed Dome
- Chapter 4 Basic Operations
- Chapter 5 System Configuration
- 5.1 Storage Settings
- 5.2 Basic Event Configuration
- 5.3 Smart Event Configuration
- 5.4 PTZ Configuration
- 5.4.1 Configuring Basic PTZ Parameters
- 5.4.2 Configuring PTZ Limits
- 5.4.3 Configuring Initial Position
- 5.4.4 Configuring Park Actions
- 5.4.5 Configuring Privacy Mask
- 5.4.6 Configuring Scheduled Tasks
- 5.4.7 Clearing PTZ Configurations
- 5.4.8 Configuring Smart Tracking
- 5.4.9 Prioritize PTZ
- 5.4.10 Position Settings
- 5.4.11 Rapid Focus
- 5.5 Face Capture Configuration
- Chapter 6 Camera Configuration
- Appendix
© Hikvision
Button
Name
Description
Focus near/far
Click , then the lens focuses far
and the object far away gets clear.
Click , then the lens focuses near
and the object nearby gets clear.
Iris close/open
When the image is too dark, click
to enlarge the iris. When the
image is too bright, click to
stop down the iris.
Auxiliary Functions
Refer to Section 4.5.2 Auxiliary
Functions for detailed information of
auxiliary functions
Speed Adjustment
Adjust speed of pan/tilt movements.
Preset
Refer to Section 4.5.3
Setting/Calling a Preset for detailed
information of setting preset.
Patrol
Refer to Section 4.5.4
Setting/Calling a Patrol for detailed
information of setting patrol.
Pattern
Refer to Section 4.5.6
Setting/Calling a Pattern for
detailed information of setting
pattern.
Buttons on the Preset/Patrol/Patterns interface:
Table 4-3 Descriptions of Buttons
Button
Description
Start the selected patrol/pattern.
Stop current patrol/pattern.
Set the selected preset/patrol.
Delete the selected preset/patrol/pattern.
Start recording a pattern.
Stop recording the pattern.