User Manual

User Manual of Network Positioning System
© Hikvision
97
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions by NTP server. It can be
set from 1 to 10080 minutes.
Figure 6-44 Time Sync by NTP Server
You can click to make sure that the NTP server is connected.
If the network positioning system is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the National Time
Center (IP Address: 210.72.145.44). If the network positioning system is set in a customized
network, NTP software can be used to establish a NTP server for time synchronization.
 Configuring Time Synchronization Manually
Steps:
(1) Check the Manual Time Sync radio button.
(2) Click to set the system time from the pop-up calendar.
(3) Click to save the settings.
You can also check the Sync with local time checkbox to synchronize the time of the network
positioning system with the time of your computer.
Figure 6-45 Time Sync Manually
 Select the Time Zone
Purpose:
When the network positioning system is taken to another time zone, you can use the Time Zone