User Manual

User Manual of Network Positioning System
© Hikvision
16
Chapter 4 Basic Operations
In this and the following chapters, operation of the network positioning system by the web
browser will be taken as an example.
4.1 Power-up Action
After the power is applied, the network positioning system will perform self-test action. It begins
with lens action and then pan/tilt movement.
After the self-test action, the system information of the network positioning system including the
model, address, communication, version, and other will be displayed on screen for 40 seconds.
4.2 Configuring Local Parameters
The local configuration refers to the parameters of the live view and other operations using the
web browser.
Steps:
1. Enter the Local Configuration interface:
Configuration > Local
Figure 4-1 Local Configuration Interface
2. Configure the following settings:
 Live View Parameters: Set the protocol type, play performance, rules and image format.
 Protocol Type: TCP, UDP, MULTICAST and HTTP are selectable.
TCP: Ensures complete delivery of streaming data and better video quality, yet the