User Manual

User Manual of Network Positioning System
© Hikvision
65
4. Click to set the current zoom ratio as the tracking zoom ratio.
5. Set the tracking duration. The network positioning system stops tracking when the duration
time is up. The duration ranges from 0 to 300 seconds.
 Setting the duration to 0 means that there’ no duration when network positioning system
tracks.
 This function varies depending on different positioning system models.
6. Click to clear the settings.
5.4.9 Prioritize PTZ
Steps:
1. Enter the Prioritize PTZ interface:
Configuration > PTZ > Prioritize PTZ.
2. Select Network or RS-485 from the dropdown list
3. Set the delay time (Range 2-200s).
4. Click to save the settings.
5.4.10 Position Settings
Purpose:
You can set the position information in this interface.
Steps:
1. Enter the Position Settings interface:
Configuration > PTZ > Position Settings