User Manual

User Manual of Network Positioning System
© Hikvision
76
Receiver: The name of the user to be notified.
Receiver’s Address: The email address of user to be notified. (Optional: click Test to make sure
that the email server can send email out.)
3. Click to save the settings.
Configuring Platform Settings
Purpose:
Platform access provides you an option to manage the devices via platform.
This function varies depending on different positioning system models.
Steps:
1. Enter the Platform settings interface:
Configuration> Network > Advanced Settings > Platform Access
Figure 6-12 Platform Access
2. Check the Enable checkbox to enable the platform access function of the device.
3. Select the Platform Access Mode.
If you select Platform Access Mode as Hik-Connect,
1) Click and read "Terms of Service" and "Privacy Policy" in pop-up window.
2) Create a verification code or change the verification code for the network positioning
system.
 The verification code is required when you add the network positioning system to
Hik-Connect app.
 For more information about the Hik-Connect app, refer to Hik-Connect Mobile Client
User Manual.
4. You can use the default server address. Or you can check the Custom checkbox on the right
and input a desired server address.
5. Click to save the settings.