How to Guide

Note:
1. 300 presets can be created totally.
2. Each preset supports 10 points, 10 frames and 1 line.
3. For PTZ cameras, temperature measurement will not become effective if the presets are not set.
Alarm Rule Configuration:
Set the alarm rule: Select a temperature measurement rule from the rule list and
configure the parameters.
Area’s Temperature Comparison:
Compare the two area rule in different ways, including Max.Temperature, Min.Temperature,
Average.Temperature and Temperature.Difference.
For example, in the following picture, if the Max temperature of Area 1 is 10 degree higher than
the Max temperature of Area 2, the Alarm output 1 will take effect.