User Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Safety Instruction
- Chapter 1 Overview
- Chapter 2 Device Activation and Accessing
- Chapter 3 Temperature Measurement
- Chapter 4 Fire Source Detection
- Chapter 5 Behavior Analysis
- Chapter 6 Event and Alarm
- Chapter 7 Arming Schedule and Alarm Linkage
- Chapter 8 Live View
- Chapter 9 Video and Audio
- 9.1 Video Settings
- 9.2 Display Settings
- 9.2.1 Image Adjustment
- 9.2.2 Image Adjustment (Thermal Channel)
- 9.2.3 Exposure Settings
- 9.2.4 Day/Night Switch
- 9.2.5 Set Supplement Light
- 9.2.6 BLC
- 9.2.7 WDR
- 9.2.8 White Balance
- 9.2.9 DNR
- 9.2.10 Defog
- 9.2.11 Set Palette
- 9.2.12 Set Target Color
- 9.2.13 DDE
- 9.2.14 Brightness Sudden Change
- 9.2.15 Enhance Regional Image
- 9.2.16 Mirror
- 9.2.17 Video Standard
- 9.2.18 Digital Zoom
- 9.2.19 Scene Mode
- 9.3 OSD
- 9.4 Set Privacy Mask
- 9.5 Overlay Picture
- 9.6 Set Manual DPC (Defective Pixel Correction)
- 9.7 Set Picture in Picture
- Chapter 10 Video Recording and Picture Capture
- Chapter 11 Network Settings
- Chapter 12 System and Security
- 12.1 View Device Information
- 12.2 Search and Manage Log
- 12.3 Import and Export Configuration File
- 12.4 Export Diagnose Information
- 12.5 Reboot
- 12.6 Restore and Default
- 12.7 Upgrade
- 12.8 View Open Source Software License
- 12.9 Time and Date
- 12.10 Set RS-232
- 12.11 Set RS-485
- 12.12 Set Same Unit
- 12.13 Security
- 12.14 User and Account
- Chapter 13 Appendix
-
For PTZ sengs, see Lens Parameters Adjustment .
-
For display sengs, see Display Sengs .
-
For OSD sengs, see OSD .
-
For audio and video
sengs, see Video and Audio .
-
For VCA
sengs, see Fire Source Detecon , Temperature Measurement , and Behavior
Analysis .
Note
The funcon is only supported by certain models.
8.1.12 Lens Parameters Adjustment
It is used to adjust the lens focus, zoom and iris.
Zoom
• Click , and the lens zooms in.
• Click
, and the lens zooms out.
Focus
• Click , then the lens focuses far and the distant object gets clear.
• Click , then the lens focuses near and the nearby object gets clear.
PTZ Speed
• Slide to adjust the speed of the pan/lt movement.
Iris
• When the image is too dark, click to enlarge the iris.
• When the image is too bright, click to stop down the iris.
8.2 Set Transmission Parameters
The live view image may be displayed abnormally according to the network condions. In dierent
network environments, you can adjust the transmission parameters to solve the problem.
Steps
1. Go to Conguraon → Local .
2. Set the transmission parameters as required.
Protocol
TCP
Thermal & Opcal Bi-spectrum Network Camera User Manual
35