User's Manual

Thermal & Optical Network Turret Camera Quick Start Guide
7
Figure 3-1 Mount the Camera Base
5. Mount the Turret body to the base. Rotate the camera body in the pan direction
(0°~360°) or rotate the lens in the tilt direction (0°~80°) to get the desired view
angle.
Figure 3-1 Mount the Camera Body
6. Screw the screw to fix the camera body on the camera base.
Figure 3-1 Screw the Camera
7. Mount the ring on the camera body, and turn it clockwise to fix the ring.
Note: The ring is only applicable to type II camera.