How to Guide

© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: [phone] • Fax: [phone]
E-Mail: [e-mail] • www.hikvision.com
3) Blackbody Installation
Installation location:
The recommended distance between the camera and the blackbody is in the above
table. The blackbody is recommend to be installed at a height of 1.7m, with an
elevation angle of within 15°. Ensure that the black body appears in the upper left /
upper right corner of the camera view. Make sure that the blackbody would not be
blocked by any other target during temperature measurement.
Configuration Steps:
1. Device start-up;
2. Press SEL for temperature setting, Press UP and DOWN to adjust the
temperature of the blackbody as 40 Degrees Celsius;
3. Confirm your adjustment by pressing SEL again;
4. Wait until the displayed temperature value reaches 40 Degrees Celsius and
remain unchanged.