How to Guide

© Hangzhou Hikvision Digital Technology Co.,Ltd. All Rights Reserved.
No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China • Tel: [phone] • Fax: [phone]
E-Mail: [e-mail] • www.hikvision.com
8. Select the thermal camera channel (normally as Camera 02).
9. Configure the following settings:
 Black Body Parameters: If no blackbody is used in this scheme, uncheck this box.
 Body Temperature Compensation: Compensate the measured value according
to the real-time environment temperature.
 Enable: Check this box to enable body temperature compensation
 Compensation Type: Setting as Auto is suggested; in this way, auto
compensation and manual calibration value would both added to the
measured value.
 Manual Calibration: The set value would be added to the measured value.
(If this value is set as 2 degrees Celsius and the measured value is 35 degrees
Celsius, the displayed value would be 37 degrees Celsius). See Manual
Calibration part in below for details.
 Environment Temperature: Setting as Auto is suggested; in this way, the
environment temperature would be automatically measured.
10. Click Save.
4) Manual Calibration
Purpose: